 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TS4274 400mA Ultra Low Dropout Fixed Voltage Regulator TO-220 TO-263 2 (D PAK) TO-252 (DPAK) SOT-223 Pin Definition: 1. Input 2. Ground 3. Output General Description The TS4274 series of fixed-voltage monolithic micro-power voltage regulators is designed for a wide range of applications. This device excellent choice of use in battery-power application. Furthermore, the quiescent current increases on slightly at dropout, which prolongs battery life. This series of fixed-voltage regulators features very low ground current (200uA Typ.) and very low drop output voltage (600mV at 400mA). This includes a tight initial tolerance of 2% typ., and very low output temperature coefficient. Features Dropout voltage typically 0.6V @Io=400mA Output current up to 400mA Output voltage trimmed before assembly Load dump protection Internal current limit Thermal shutdown protection Ordering Information Part No. TS4274CZxx C0 TS4274CMxx RN TS4274CPxx RO Package TO-220 TO-263 TO-252 Packing 50pcs / Tube 800pcs / 13" Reel 2.5Kpcs / 13" Reel Block Diagram TS4274CWxx RP SOT-223 2.5Kpcs / 13" Reel Note: Where xx denotes voltage option, available are 12= 12V 50= 5.0V 33= 3.3V 25= 2.5V 18= 1.8V Absolute Maximum Rating Parameter Input Supply Voltage Operation Input Supply Voltage Power Dissipation Junction Temperature Range Operating Temperature Range Storage Temperature Range Symbol VIN VOPR PD TJ TOPR TSTG Limit -18 ~ +35 26 Internally Limited +150 -40 ~ + 85 -65 ~ +150 Unit V V W o o o C C C 1/10 Version: A07 TS4274 400mA Ultra Low Dropout Fixed Voltage Regulator Electrical Characteristics ( VIN=VOUT+1V, IL=5mA, CO=10uF, TA=25oC, unless otherwise noted) Parameter Output Voltage Input Supply Voltage Output Voltage Temperature Coefficient Line Regulation Load Regulation Dropout Voltage (Note 4) Vo+1V VIN 26V 5mA IL 400mA IL=100mA IL=250mA IL=400mA IL=100uA Quiescent Current (Note 5) Short Circuit Current (Note 6) Output Noise, 10Hz to 100KHz, IL=10mA Power Supply Ripple Rejection IL=250mA IL=400mA VOUT=0 CL=2.2uF CL=3.3uF CL=33uF F=100Hz, Vr=0.5Vss Conditions 5mA IL 500mA, Vo+1V VIN 26V Min 2.40 3.17 4.80 ---------------- Typ 2.5 3.3 5.0 -50 0.05 0.2 100 300 500 200 10 25 600 500 350 120 60 Max 2.60 3.43 5.20 26 150 0.5 2.0 200 400 600 300 15 35 900 ----- Unit V V ppm/ C % % mV uA mA mA mA uVrms dB o Thermal Performance Condition Thermal Resistance Junction to Ambient Package type TO-220 TO-263 TO-252 Typ 60 80 150 o Unit C/W SOT-223 170 Note 1: Absolute Maximum Rating is limits beyond which damage to the device may occur. For guaranteed specifications and test conditions see the electrical characteristics. Note 2: Maximum positive supply voltage of 35V must be limited duration (<100mS) and duty cycle (<1%). Note 3: The maximum allowable power dissipation is a function of the maximum junction temperature, TJ, the junction to ambient thermal resistance, JA, and the ambient temperature, Ta. Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. The effective value of JA can be reduced by using a heatsink. Note 3: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V differential. Note 4: Ground pin current is the regulator quiescent current. The total current drawn from the source is the sum of the ground pin current and output load current. Note 5: Output current will decrease with increasing temperature, but it will be not dropped below 400mA at the maximum specified temperature. 2/10 Version: A07 TS4274 400mA Ultra Low Dropout Fixed Voltage Regulator Application Information The TS4274 series is a high performance with low dropout voltage regulator suitable for moderate to high current and voltage regulator application. Its 600mV(typ) dropout voltage at full load and over temperature makes it especially valuable in battery power systems and as high efficiency noise filters in post regulator applications. Unlike normal NPN transistor design, where the base to emitter voltage drop and collector to emitter saturation voltage limit the minimum dropout voltage, dropout performance of the PNP output of these devices is limited only by low Vce saturation voltage. The TS4274 series is fully protected from damage due to fault conditions. Linear current limiting is provided. Output current during overload conditions is constant. Thermal shutdown the device when the die temperature exceeds the maximum safe operating temperature. Transient protection allows device survival even when the input voltage spikes above and below nominal. The output structure of these regulators allows voltages in excess of the desired output voltage to be applied without reverse current flow. Typical Application Circuit Output Capacitor The TS4274 series requires an output capacitor to maintain stability and improve transient response. Proper capacitor selection is important to ensure proper operation. The output capacitor selection is dependent upon the ESR of the output capacitor the maintain stability. When the output capacitor is 10uF or greater, the output capacitor should have an ESR less than 2 ohm. This will improve transient response as well as promoted stability. Ultra low ESR capacitors (<100mohm), such as ceramic chip capacitors may promote instability. These very low ESR levels may cause an oscillation and/or under damped transient response. A low ESR solid tantalum capacitor works extremely well and provides good transient response and stability over temperature. Aluminum electrolytic can also be used, as long as the ESR of the capacitor is <2ohm. The value of the output capacitor can be increased without limit. Higher capacitance values help to improved transient response and ripple rejection and reduce output noise. Minimum Load Current The TS4274 series is specified between finite loads. If the output current is too small leakage currents dominate and the output voltage rises. A 1mA minimum load current is necessary for proper regulation. Input Capacitor An input capacitor of 1uF or greater is recommended when the device is more that 4 inches away from the bulk AC supply capacitance or when the supply is a battery. Small and surface mount ceramic chip capacitors can be used for bypassing. Larger values will help to improve ripple rejection by bypassing the input to the regulator, further improving the integrity of the output voltage. 3/10 Version: A07 TS4274 400mA Ultra Low Dropout Fixed Voltage Regulator Application Information (Continue) Thermal Characteristics A heatsink may be required depending on the maximum power dissipation and maximum ambient temperature of the application. Under all possible operating conditions, the junction temperature must be within the range specified under absolute maximum ratings. To determine if the heatsink is required, the power dissipated by the regulator, PD must be calculated. The below formula shows the voltages and currents for calculating the PD in the regulator: IIN = IL / IG PD = (VIN-VOUT) * IL + (VIN) * IG Ex. PD = (3.3V-2.5V) * 0.5A + 3.3V * 11mA = 400mW + 36mW = 436mW Remark: IL is output load current, IG is ground current. VIN is input voltage VOUT is output voltage The next parameter which must be calculated is the maximum allowable temperature rise. TR(max) is calculated by the using to formula: TR(max) = TJ(max) - TA(max) Where: TJ(max) is the maximum allowable junction temperature, which is 125 C for commercial grade parts. TA(max) is the maximum ambient temperature which will be encountered in the application. Using the calculated values for TR(max) and PD, the maximum allowable value for the junction to ambient thermal resistance, JA, can now be found: JA = TR(max) / PD IMPORTANT: if the maximum allowable value for is found to be 60 C /W for the TO-220 package, 80 C/W for the o o TO-263 package, 150 C/W for the TO-252 package, or 170 C /W for the SOT-223 package, no heatsink is needed since the package alone will dissipate enough heat to satisfy these requirements. If the calculated value for JA falls below these limits, a heatsink is required. o o o 4/10 Version: A07 TS4274 400mA Ultra Low Dropout Fixed Voltage Regulator Application Information (Continue) Figure 1 - D PAK Thermal Resistance and Maximum Power Dissipation vs. P.C.B Copper Length 2 Figure 2 - DPAK Thermal Resistance and Maximum Power Dissipation vs. P.C.B Copper Length Figure 3 - SOT-223 Thermal Resistance and Maximum Power Dissipation vs. P.C.B Copper Length 5/10 Version: A07 TS4274 400mA Ultra Low Dropout Fixed Voltage Regulator TO-220 Mechanical Drawing DIM A B C D E F G H I J K L M N O P TO-220 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 10.000 10.500 0.394 0.413 3.740 3.910 0.147 0.154 2.440 0.381 2.345 4.690 12.700 8.382 14.224 3.556 0.508 27.700 2.032 0.255 5.842 2.940 6.350 1.106 2.715 5.430 14.732 9.017 16.510 4.826 1.397 29.620 2.921 0.610 6.858 0.096 0.015 0.092 0.092 0.500 0.330 0.560 0.140 0.020 1.060 0.080 0.010 0.230 0.116 0.250 0.040 0.058 0.107 0.581 0.355 0.650 0.190 0.055 1.230 0.115 0.024 0.270 Marking Diagram Y M = Year Code = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) = Lot Code = Voltage Code (1.8=1.8V, 2.5=2.5V, 3.3=3.3V, 5.0=5V, 12=12V) L XX 6/10 Version: A07 TS4274 400mA Ultra Low Dropout Fixed Voltage Regulator TO-263 Mechanical Drawing DIM A B C D E F G H I J TO-263 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 10.000 10.500 0.394 0.413 14.605 15.875 0.575 0.625 0.508 0.991 0.020 0.039 2.420 2.660 0.095 0.105 4.064 4.830 0.160 0.190 1.118 1.400 0.045 0.055 0.450 0.730 0.018 0.029 8.280 8.800 0.325 0.346 1.140 1.400 0.044 0.055 1.480 1.520 0.058 0.060 Marking Diagram Y M = Year Code = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) = Lot Code = Voltage Code (1.8=1.8V, 2.5=2.5V, 3.3=3.3V, 5.0=5V, 12=12V) L XX 7/10 Version: A07 TS4274 400mA Ultra Low Dropout Fixed Voltage Regulator TO-252 Mechanical Drawing TO-252 DIMENSION DIM A A1 B C D E F G G1 G2 H I J K L M MILLIMETERS MIN MAX 2.3BSC 4.6BSC 6.80 5.40 6.40 2.20 0.00 5.20 0.75 0.55 0.35 0.90 2.20 0.50 0.90 1.30 7.20 5.60 6.65 2.40 0.20 5.40 0.85 0.65 0.65 1.50 2.80 1.10 1.50 1.70 INCHES MIN MAX 0.09BSC 0.18BSC 0.268 0.213 0.252 0.087 0.000 0.205 0.030 0.022 0.014 0.035 0.087 0.020 0.035 0.051 0.283 0.220 0.262 0.094 0.008 0.213 0.033 0.026 0.026 0.059 0.110 0.043 0.059 0.67 Marking Diagram Y M = Year Code = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) = Lot Code = Voltage Code (1.8=1.8V, 2.5=2.5V, 3.3=3.3V, 5.0=5V, 12=12V) L XX 8/10 Version: A07 TS4274 400mA Ultra Low Dropout Fixed Voltage Regulator SOT-223 Mechanical Drawing SOT-223 DIMENSION DIM A B C D E F G H I J K MILLIMETERS MIN 6.350 2.900 3.450 0.595 4.550 2.250 0.835 6.700 0.250 10 1.550 MAX 6.850 3.100 3.750 0.635 4.650 2.350 1.035 7.300 0.355 16 1.800 INCHES MIN 0.250 0.114 0.136 0.023 0.179 0.088 0.032 0.263 0.010 10 0.061 MAX 0.270 0.122 0.148 0.025 0.183 0.093 0.041 0.287 0.014 16 0.071 Marking Diagram Y M = Year Code = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) = Lot Code = Voltage Code (1.8=1.8V, 2.5=2.5V, 3.3=3.3V, 5.0=5V, 12=12V) L XX 9/10 Version: A07 TS4274 400mA Ultra Low Dropout Fixed Voltage Regulator Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. 10/10 Version: A07 |
Price & Availability of TS4274CM
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |